SELF-PROPELLED
FSI B21
Stump Cutter with a petrol engine (Push version)
The B21 is the latest compact and balanced stump grinder that can be used to grind down all types of tree stumps.
The all new Hill Hold System, Worry no more about your stump grinder rolling away from you on the way up the ramp. A unique braking system ensures safe and easy transport up ramps, over steps/curbs and in terrain. When the hill-hold system is active, the stump cutter can be pulled backwards safely and easily without the risk of the wheels rolling forwards.
Now no daily maintenance with the development of a closed bearing housing, which is lubricated from factory for more than 1000 hours of normal operation. Therefore you no longer need to think about daily lubrication of the bearings.
Simply V-belt tensioning – The special FSI cutting disc is mounted with a one sided bearing housing, allowing for a very simple tensioning of the V-belt.
FSI B20
Stump Cutter with a petrol engine (Push version)
The B20 is a compact and balanced stump grinder that can be used to grind down all types of tree stumps, weighing only 120Kg it’s easy to manoeuvre between jobs.
The pivot joint between the stump grinder and the wheel axle ensures easy and smooth grinding, even under difficult conditions.
The brakes can be applied individually to each wheel, so the machine can easily access the stump even if there are shavings in the way. The individual brakes can also be used to negotiate steps with ease.
FSI B22
Self-propelled stump cutter with Hydraulic 2WD and petrol engine
Self-propelled means the user can move the machine with ease, both moving to and from the stump that is to be ground down and especially when moving the machine onto a trailer or lorry after use.
The hydraulically driven wheels provide a top speed of 3 km/h. In contrast to the B20, the machine is equipped with a complete hydraulic system with tank, pump and engine.
The actual stump grinding is executed by making small manual sideways movements of the stump grinder into the stump. It is extremely easy to move the machine sideways since only the grinding section moves and not the wheels. All sideways and up/down movements are executed manually with both hands on the handlebar. A centrifugal clutch transfers energy from the V-belt drive to the cutting disc.
Using the handlebar, the operator can move the machine, grind down stumps and operate the brakes and pivot joint lock. A safety bar ensures that the operator is safe since it must be activated when operating the machine and when grinding down a stump.
FSI B28
Self-propelled Stump Cutter with Hydraulic 2WD Drive and petrol engine
FSI B28 is for the serious professional user who carries out stump grinding jobs.
All operations, including travel and stump grinding, are controlled via the integrated control panel. The control panel can be used to engage/disengage the diff lock as well as to adjust the speed of the swing movement.
Safety is a top priority, and the safety handle on the control panel must be enabled to start the grinder head.
FSI D30
Self-propelled Stump Cutter with Hydraulic 2WD drive and diesel engine
FSI D30 is for the serious user who uses a stump grinder regularly in their work. The diesel engine provides high-performance capacity and excellent operating efficiency.
All operations, including travel and actual stump grinding, are controlled via the integrated control panel. The control panel can be used to engage/disengage the diff lock as well as to adjust the speed of the swing movement.
Safety is a top priority, and the safety handle on the control panel must be enabled to start the grinder head.
FSI D30 TRACKED
Optional Dozer Blade
Self-propelled Stump cutter with Tracks and diesel engine, also available as a Remote Control Version with an option for Dozer Blade on both models.
The new track version increased the terrain capability, and thus transport to stumps that need to be removed has been optimised. Another great benefit is the extreme stability achieved when grinding down a stump because of the high dead weight.
FSI D30 TRACK is equipped with a 30 HP Kubota water-cooled diesel engine and a cutting disc that is 470 mm in diameter. Hydraulic cylinders provide the stump grinder’s up/down and sideways movement. The machine is 775 mm in width, and with the belts in the outer position.
Machine width is 1050 mm. Total weight is 950 kg.
All machine operation, moving the stump grinder and grinding down stumps is executed via the integrated control panel, so the operator can stand behind the machine during operation and move towards the work site, and the panel can be turned during stump grinding, providing a good overview of the stump during the stump grinding process. An ergonomic safety bar on the panel functions as a support for the operator’s hands and as an emergency stop, since it must be activated when moving the stump grinder and when grinding down stumps. To ensure maximum visibility and use, the machine is equipped with powerful LED work lights. \\Also be used with remote control.
FSI B38
Strong and narrow selfproppelled Stump Cutter with 2WD and 38 hp gasoline engine
Data sheet: FSI B38 UK.pdf
• Machine width 79 cm / 31 Inches
• Sweep width 170 cm / 77 Inches
• Cutting depth 44 cm / 17,5 Inches
• Kohler 38 hp petrol engine
Standard includes:
• Hydraulic drive and diff-lock on the front wheels
• Automatic brakes on the wheels
• Twin wheels with single centre-bolt for easy mounting
• Skid-steer tires on the front axle for optimal ground control
• FSI power clutch. Electric-hydraulic clutch system
with integrated brakes
• FSI power-sweep for top performence
• Adjustable speed on the swing
• Double hydraulic cylinder for the swing function
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable teeth-system with FSI holders
• FSI power-cut special designed cutting wheel
• Integrated points for lashing
• Lifting points for handling with crane
• 90 degr. turnable control panel for optimal view to the
cutting area
• Al controls in one panel
• Safety bar. If the operator leaves the control panel
the cutting wheel will automatically stop
• LED work light
• Hanged and splitted chip protection
• Integrated toolbox
• Tool set for wearing parts
FSI B38 is also available as:
• FSI B38 4WD
• FSI B38 4WD REMOTE (with radio remote control)
• FSI B38 TRACK (on tracks with radio remote control)
FSI B38 4WD
NEW
Stump cutter with 4WD and 38 hp petrol engine
Data sheet: FSI B38 4WD UK.pdf
• Machine width 79 cm / 31 Inches
• Sweep width 170 cm / 77 Inches
• Cutting depth 44 cm / 17,5 Inches
• Hydraulic 4-wheel drive with diff-lock
• Kohler 38 hp petrol engine
Standard includes:
• FSI power-drive, HI/LO with diff-lock on the front wheels
– HI 2-wheel drive, speed up to 3,5 km/h
– LO 4-wheel drive, double traction force, half speed
• Automatic brakes on the wheels
• Twin wheels with single centre-bolt for easy mounting
• Skid-steer tires on the front axle for optimal ground control
• FSI power clutch. Electric-hydraulic clutch system
with integrated brakes
• FSI power-sweep with auto-pilot for top performence
• Adjustable speed on the swing
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable teeth-system with FSI holders
• FSI power-cut special designed cutting wheel
• Sealed bearinghousing for the cutting wheel – no maintenance
• Integrated points for lashing
• Lifting points for handling with crane
• 90 degr. turnable control panel for optimal view to the
cutting area
• Al controls in one panel
• Safety bar. If the operator leaves the control panel
the cutting wheel will automatically stop
• LED work light
• Hanged and splitted chip protection
• Integrated toolbox
• Tool set for wearing parts
FSI B38 4WD REMOTE
• Sweep width 170 cm / 77 Inches
• Cutting depth 44 cm / 17,5 Inches
• Hydraulic 4-wheel drive with diff-lock
• Kohler 38 hp petrol engine
• Scanreco Radio Remote ControlStandard includes:
• FSI power-drive, HI/LO with diff-lock on the front wheels
– HI 2-wheel drive, speed up to 3,5 km/h
– LO 4-wheel drive, double traction force, half speed
• Automatic brakes on the wheels
• Twin wheels with single centre-bolt for easy mounting
• Skid-steer tires on the front axle for optimal ground control
• FSI power clutch. Electric-hydraulic clutch system
with integrated brakes
• FSI power-sweep with auto-pilot for top performence
• Adjustable speed on the swing
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable teeth-system with FSI holders
• FSI power-cut special designed cutting wheel
• Sealed bearinghousing for the cutting wheel – no maintenance
• Integrated points for lashing
• Lifting points for handling with crane
• Fully radio remote control of all functions incl. Battery charger,
extra battery and connection cable
• Operator panel with drive control
• LED work light
• Hanged and splitted chip protection
• Integrated toolbox
• Tool set for wearing parts
FSI B38 Tracked
New
• Sweep width 170 cm / 77 Inches
• Cutting depth 44 cm / 17,5 Inches
• Gemmo expanddable Track base
• Kohler 38 hp petrol engine
• Scanreco Radio Remote ControlStandard includes:
• FSI power-drive
– HI – speed up to 3,5 km/h
– LO – double traction force, half speed
• Automatic brakes
• FSI power clutch. Electric-hydraulic clutch system
with integrated brakes
• FSI power-sweep with auto-pilot for top performence
• Adjustable speed on the swing
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable teeth-system with FSI holders
• FSI power-cut special designed cutting wheel
• Sealed bearinghousing for the cutting wheel – no maintenance
• Integrated points for lashing
• Lifting points for handling with crane
• Fully radio remote control of all functions incl. Battery charger,
extra battery and connection cable
• Operator panel with drive control
• LED work light
• Hanged and splitted chip protection
• Integrated toolbox
• Tool set for wearing parts
FSI D60 & D60TR Stump cutter with 4WD and radio remote control
• Machine width 80 cm
• Sweep width 170 cm
• Cutting depth 44/ cm
• Hydraulic 4WD with diff lock
• Hatz 60hp diesel engine
• Radio remote control
• FSI power-drive with diff. lock on the front axle
– HI 2-wheel drive, speed up to 3,5 km/h
– LO 4-wheel drive, double traction force, half speed
• Automatic brakes on the front wheels
• Twin wheels with single centre-bolt for easy mounting
• Skid-steer tires on the front axle for optimal ground control
• Elektro-mechanic clutch with integrated brake
• Fast stop of cutter wheel by declutching
• FSI power-sweep with auto-pilot for top performance
• V-belt transmission for optimal capacity and maximum power transmission to the cutting head
• FSI Tooth system, 3 x turnable positions
• FSI power-cut special designed 2-parts cutting wheel
• Sealed bearing housing for the cutting wheel – no maintenance
• Integrated tie-down points for lashing
• Lifting points for easy handling with crane
• Fully radio remote control of all actions
• Battery charger, extra battery and connection cable
• Lockable locker for the radio remote control unit
• LED work light
• 3 sided debris protection covers
• Integrated toolbox
Optional Extra: Rear mounted dozer blade
.
FSI D60 is also available as:
• FSI D60 TRACK (on tracks with radio remote control)
FSI D74 REMOTE
for the professional use where stump grinding forms a major part of their daily life.
With the NEW 74hp Kholer diesel engine, the large 720 mm grinding wheel and two-meter sweep all combine to give an incredible capacity. That, along with the 4-wheel drive and radio remote control, makes the D74 REMOTE your ideal partner for the grinding of tree stumps.
All travel and stump grinding operations are controlled via the radio remote control. A battery charger with a spare battery for the radio control system is mounted on the machine. Includes a cable to connect directly to the remote control.
When the machine is equipped with the optional Dozer Blade, this also can provide extra grinding depth.
The machine is also equipped with an autopilot swing function for optimum grinding capacity. The autopilot adjusts the swing speed based on the engine load. The autopilot optimises capacity and makes it simpler to operate the machine.
Standard delivery includes:
- Twin wheels.
- LED work light. Turn on and off via the remote control.
